Toyota Camry (XV70): Automatic air conditioning system (with "SYNC" button)
Air outlets and fan speed are automatically adjusted according to the temperature setting.
Air conditioning controls
■ Adjusting the temperature setting
To adjust the temperature setting, turn
clockwise to increase
the temperature and counterclockwise to decrease the temperature.
If 
is not pressed, the system will
blow ambient temperature air or
heated air.
The air conditioning system switches between individual and synchronized
modes each time 
is pressed.
Synchronized modes (indicator on):
The driver's side 
dial can be used
to adjust the temperature for
the driver's and front passenger's side. At this time, operate the front
passenger's side 
dial to enter
individual mode.
Individual modes (indicator off): The temperature for the driver's and front passenger's side can be adjusted separately.
■ Fan speed setting
To adjust the fan speed, press 
to increase the fan speed
and 
to decrease the fan speed.
Press 
to turn the fan off.
■ Change the airflow mode
To change the airflow mode,
press 
.
The air outlets used are switched each time the button is pressed.
- Air flows to the upper body.
- Air flows to the upper body and feet.
- Air flows to the feet.
- Air flows to the feet and the windshield defogger operates.
Using automatic mode
1. Press
.
The dehumidification function begins to operate. Air outlets and fan speed are automatically adjusted according to the temperature setting.
2. Adjust the temperature setting.
3. To stop the operation, press 
.
■ Automatic mode indicator
If the fan speed setting or air flow modes are operated, the automatic mode indicator goes off. However, automatic mode for functions other than that operated is maintained.
Other functions
■ Switching between outside air and recirculated air modes
Press 
.
The mode switches between outside air mode (indicator off) and recirculated
air mode (indicator on) each time 
is pressed.
■ Defogging the windshield
Defoggers are used to defog the windshield and front side windows.
Press 
.
The dehumidification function operates and fan speed increases.
Set the outside/recirculated air mode button to the outside air mode if the recirculated air mode is used. (It may switch automatically.) To defog the windshield and the side windows early, turn the air flow and temperature up.
To return to the previous mode, press
again when the windshield
is defogged.
■ Defogging the rear window and outside rear view mirrors
Vehicles without outside rear view mirror defoggers
A defogger is used to defog the rear window.
Press 
.
The defogger will automatically turn off after a period of time.
Vehicles with outside rear view mirror defoggers
Defoggers are used to defog the rear window, and to remove raindrops, dew and frost from the outside rear view mirrors.
Press 
.
The defoggers will automatically turn off after a period of time.
READ NEXT:
Air outlets - Automatic air conditioning system (with "SYNC" button)
■ Location of air outlets
The air outlets and air volume
change according to the
selected airflow mode.
■ Adjusting the position of and opening and closing the air outlets
Front
Rear
Heated steering wheel/seat heaters/seat ventilators
Heated steering wheel and seat heaters heat the side grips of the
steering wheel and seats, respectively. Seat ventilators maintain
good ventilation by pulling air through the seat upholstery.
WARN
Using the interior lights
Interior lights list
Front interior/personal lights
Shift lever light (if equipped)
Inside door handle lights (if equipped)
Rear interior light (if equipped)
Rear personal lights (if e
SEE MORE:
Front passenger occupant classification system
Your vehicle is equipped with a front passenger occupant classification
system. This system detects the conditions of the front
passenger seat and activates or deactivates the front passenger
airbag and front passenger knee airbag.
Driver's and front passenger's seat belt reminder light
S
Pressure Control Solenoid "A" Circuit Short to Battery (P074512)
DESCRIPTION Changing gears is performed by the ECM turning the solenoid (SL1, SL2, SL3, SL4, SL5 and SL6) valves on and off.
If an open or short occurs in any of the solenoid valve circuits, the ECM controls the remaining normal solenoid valves to allow the vehicle to be driven. If all of the sole
