Toyota Camry (XV70): Child safety
Toyota Camry Owner's Manual XV70 (2017-2024) / For safety and security / Child safety
- Riding with children
- Child restraint systems
- Child restraint system fixed with a seat belt
- Child restraint system fixed with a child restraint LATCH anchor
- Using an anchor bracket (for top tether strap)
READ NEXT:
Riding with children
Observe the following precautions when children are in the vehicle.
Use a child restraint system appropriate for the child, until the
child becomes large enough to properly wear the vehicle's seat
Child restraint systems
Before installing a child restraint system in the vehicle, there are
precautions that need to be observed, different types of child
restraint systems, as well as installation methods, etc., written
Child restraint system fixed with a seat belt
A child restraint system for a small child or baby must itself be properly
restrained on the seat with the lap portion of the lap/shoulder belt.
◆ Installing child restraint system using a seat be
SEE MORE:
Test Mode Procedure
TEST MODE PROCEDURE SENSOR CHECK USING DEALER MODE (SIGNAL CHECK)
NOTICE:
After replacing or removing and installing a speed sensor, perform Dealer Mode (Signal Check) inspection to confirm that the speed sensors are operating correctly.
After replacing or removing and installing a speed
Blind Spot Monitor Master Module (C1AB6)
DESCRIPTION This DTC is stored when the blind spot monitor sensor RH detects an internal malfunction.
DTC No. Detection Item
DTC Detection Condition Trouble Area
C1AB6 Blind Spot Monitor Master Module
The blind spot monitor sensor RH (master) detects an internal malfun
© 2023-2026 Copyright www.tocamry.com
