Toyota Camry (XV70): Outside Vehicle
OUTSIDE VEHICLE
- These are maintenance and inspection items that are considered to be the owner's responsibility.
The owner can do them or they can have them done at a service center.
These items include those that should be checked on a daily basis, those that in most cases do not require special tools, and those that are considered to be reasonable for the owner to do.
General maintenance items and procedures are as follows:
GENERAL NOTES
- Maintenance requirements vary depending on country.
- Check the maintenance schedule in the owner's manual.
- Following the maintenance schedule is mandatory.
- Determine the appropriate time to service the vehicle using either miles driven or time (months) elapsed, whichever reaches the specification first.
- Failing to check each vehicle part could lead to poor engine performance and increased exhaust emissions.
TIRES
(a) Check the tire inflation pressure with a gauge. Make adjustments if necessary.
(b) Check the surfaces of the tires for cuts, damage or excessive wear.
WHEEL NUTS
(a) Check for nuts that are loose or missing. Tighten them if necessary.
TIRE ROTATION
(a) Check the maintenance schedule in the owner's manual.
WINDSHIELD WIPER BLADES
(a) Check the blades for wear or cracks whenever they are unable to wipe the windshield clean. Replace them if necessary.
FLUID LEAKS
(a) Check under the vehicle for leaking fuel, oil, water and other fluids.
NOTICE:
If you smell fuel or notice any leaks, locate the cause and correct it.
DOORS AND ENGINE HOOD
(a) Check that all of the doors and the hood operate smoothly, and that all of the latches lock securely.
(b) When the primary latch is released, check that the engine hood secondary latch prevents the hood from opening.
READ NEXT:
INSIDE VEHICLE
These are maintenance and inspection items that are considered to be the owner's responsibility.
The owner can do them or they can have them done at a service center.
These ite
UNDER HOOD GENERAL NOTES
Maintenance requirements vary depending on country.
Check the maintenance schedule in the owner's manual.
Following the maintenance schedule is mandatory.
Det
ENGINE HINT: Perform these procedures after the engine has cooled down.
INSPECT DRIVE BELT (a) Check the drive belt. A25A-FKS: Click here
2GR-FKS: Click here
INSPECT ENGINE OIL (a) Check the
SEE MORE:
DESCRIPTION The front corner ultrasonic sensor LH is installed on the front bumper. The clearance warning ECU assembly detects obstacles based on signals it receives from the front corner ultrasonic sensor LH. If an open circuit or other malfunction occurs in the front corner ultrasonic sensor LH, t
DESCRIPTION This DTC is stored when the blind spot monitor sensor LH judges that there is a communication problem with the blind spot monitor sensor RH.
DTC No. Detection Item
DTC Detection Condition Trouble Area
U0233 Lost Communication with Blind Spot Monitor Master Module