Toyota Camry (XV70): Alarm
The alarm
The alarm uses light and sound to give an alert when an intrusion is
detected.
The alarm is triggered in the following situations when the alarm is
set:
Vehicles without a smart key system
- A locked door is unlocked or opened in any way other than using
the wireless remote control or key. (The doors will lock again
automatically.)
- The trunk is opened in any way other than using the wireless
remote control.
- The hood is opened.
Vehicles with a smart key system
- A locked door is unlocked or opened in any way other than using
the entry function, wireless remote control or mechanical key. (The
doors will lock again automatically.)
- The trunk is opened in any way other than using the entry function
or wireless remote control.
- The hood is opened.
Setting the alarm system
Close the doors, trunk and hood,
and lock all the doors. The system
will be set automatically after 30
seconds.
The indicator light changes from
being on to flashing when the system
is set.
Deactivating or stopping the alarm
Do one of the following to deactivate or stop the alarm:
Vehicles without a smart key system
- Unlock the doors.
- Open the trunk using the wireless remote control.
- Turn the engine switch to the "ACC" or "ON" position, or start the
engine. (The alarm will be deactivated or stopped after a few seconds.)
Vehicles with a smart key system
- Unlock the doors.
- Open the trunk using the entry function or wireless remote control.
- Turn the engine switch to ACCESSORY or IGNITION ON mode, or
start the engine. (The alarm will be deactivated or stopped after a
few seconds.)
■System maintenance
The vehicle has a maintenance-free type alarm system.
■Items to check before locking the vehicle
To prevent unexpected triggering of the alarm and vehicle theft, make sure of
the following:
- Nobody is in the vehicle.
- The windows and moon roof or panoramic moon roof are closed before the
alarm is set.
- No valuables or other personal items are left in the vehicle.
■Triggering of the alarm
The alarm may be triggered in the following situations:
(Stopping the alarm deactivates the alarm system.)
- For Canada: The doors are unlocked
using the key or mechanical key.
- Except for Canada: The trunk is opened
using the key or mechanical key.
- A person inside the vehicle opens a door
or the trunk or hood, or unlocks the vehicle.
- The battery is recharged or replaced
when the vehicle is locked.
■Alarm-operated door lock
In the following cases, depending on the situation, the door may
automatically
lock to prevent improper entry into the vehicle:
- When a person remaining in the vehicle unlocks the door and the alarm is
activated.
- While the alarm is activated, a person remaining in the vehicle unlocks
the
door.
- When recharging or replacing the battery
NOTICE
■To ensure the system operates correctly
Do not modify or remove the system. If modified or removed, the proper
operation of the system cannot be guaranteed.
READ NEXT:
The warning lights and indicators on the instrument cluster, center
panel and outside rear view mirrors inform the driver of the
status of the vehicle's various systems.
For the purpose of explan
4.2-inch display
7-inch display
Tachometer
Displays the engine speed in revolutions per minute
Shift position
Outside temperature
Displays the outside temperature within the range of
SEE MORE:
DESCRIPTION This DTC is stored when the blind spot monitor sensor RH judges that there is a communication problem with the blind spot monitor sensor LH.
DTC No. Detection Item
DTC Detection Condition Trouble Area
U0232 Lost Communication with Blind Spot Monitor Slave Module
REMOVAL CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during brake actuator assembly removal/installation are shown below. Necessary Procedures After Parts Removed