Toyota Camry owners & service manuals

Toyota Camry (XV70): Brake Pressure Control Solenoid "C" Control Circuit Short to Battery (C14F112,...,C14FA49)

DESCRIPTION

The ABS solenoid relay and reservoir cut solenoid valves are built into the brake actuator assembly.

When the brakes are operating, the reservoir cut solenoid valves supply brake fluid from the brake master cylinder reservoir assembly to the pump motor as necessary.

When this DTC is stored, the fail-safe function operates and the ABS solenoid relay is turned off to prevent the reservoir cut solenoid valves from operating.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C14F112

Brake Pressure Control Solenoid "C" Control Circuit Short to Battery

A short to +B in the reservoir cut solenoid circuit is detected during the self test.

Skid control ECU (brake actuator assembly)

C14F114

Brake Pressure Control Solenoid "C" Control Circuit Short to Ground or Open

An open or short in the reservoir cut solenoid circuit is detected during the self test.

Skid control ECU (brake actuator assembly)

C14F11C

Brake Pressure Control Solenoid "C" Control Circuit Voltage Out of Range

  • A current leak in the reservoir cut solenoid circuit is detected during the self test.
  • The reservoir cut solenoid valve operation request signal and reservoir cut solenoid valve operation feedback signal do not match for a certain period of time.

Skid control ECU (brake actuator assembly)

C14F11E

Brake Pressure Control Solenoid "C" Control Circuit Resistance Out of Range

An abnormal resistance in the reservoir cut solenoid circuit is detected during the self test.

Skid control ECU (brake actuator assembly)

C14F149

Brake Pressure Control Solenoid "C" Control Internal Electronic Failure

An internal malfunction in the reservoir cut solenoid circuit is detected during the self test.

Skid control ECU (brake actuator assembly)

C14FA12

Brake Pressure Control Solenoid "D" Control Circuit Short to Battery

A short to +B in the reservoir cut solenoid circuit is detected during the self test.

Skid control ECU (brake actuator assembly)

C14FA14

Brake Pressure Control Solenoid "D" Control Circuit Short to Ground or Open

An open or short in the reservoir cut solenoid circuit is detected during the self test.

Skid control ECU (brake actuator assembly)

C14FA1C

Brake Pressure Control Solenoid "D" Control Circuit Voltage Out of Range

  • A current leak in the reservoir cut solenoid circuit is detected during the self test.
  • The reservoir cut solenoid valve operation request signal and reservoir cut solenoid valve operation feedback signal do not match for a certain period of time.

Skid control ECU (brake actuator assembly)

C14FA1E

Brake Pressure Control Solenoid "D" Control Circuit Resistance Out of Range

An abnormal resistance in the reservoir cut solenoid circuit is detected during the self test.

Skid control ECU (brake actuator assembly)

C14FA49

Brake Pressure Control Solenoid "D" Control Internal Electronic Failure

An internal malfunction in the reservoir cut solenoid circuit is detected during the self test.

Skid control ECU (brake actuator assembly)

DTC Detection Conditions: C14F114
 

Vehicle Condition

Pattern 1

Pattern 2

Diagnosis Condition

-

-

-

Malfunction Status

An open in the reservoir cut solenoid circuit is detected during the self test.

-

A short in the reservoir cut solenoid circuit is detected during the self test.

-

Detection Time

-

-

Number of Trips

1 trip

1 trip

HINT:

DTC will be output when conditions for either of the patterns in the table above are met.

DTC Detection Conditions: C14F11C
 

Vehicle Condition

Pattern 1

Pattern 2

Diagnosis Condition

-

-

-

Malfunction Status

A current leak in the reservoir cut solenoid circuit is detected during the self test.

-

The reservoir cut solenoid valve operation request signal and reservoir cut solenoid valve operation feedback signal do not match for a certain period of time.

-

Detection Time

-

-

Number of Trips

1 trip

1 trip

HINT:

DTC will be output when conditions for either of the patterns in the table above are met.

DTC Detection Conditions: C14FA14
 

Vehicle Condition

Pattern 1

Pattern 2

Diagnosis Condition

-

-

-

Malfunction Status

An open in the reservoir cut solenoid circuit is detected during the self test.

-

A short in the reservoir cut solenoid circuit is detected during the self test.

-

Detection Time

-

-

Number of Trips

1 trip

1 trip

HINT:

DTC will be output when conditions for either of the patterns in the table above are met.

DTC Detection Conditions: C14FA1C
 

Vehicle Condition

Pattern 1

Pattern 2

Diagnosis Condition

-

-

-

Malfunction Status

A current leak in the reservoir cut solenoid circuit is detected during the self test.

-

The reservoir cut solenoid valve operation request signal and reservoir cut solenoid valve operation feedback signal do not match for a certain period of time.

-

Detection Time

-

-

Number of Trips

1 trip

1 trip

HINT:

DTC will be output when conditions for either of the patterns in the table above are met.

CAUTION / NOTICE / HINT

NOTICE:

After replacing the skid control ECU (brake actuator assembly), perform acceleration sensor zero point calibration and system information memorization.

Click here

PROCEDURE

1.

REPLACE BRAKE ACTUATOR ASSEMBLY

(a) Replace the skid control ECU (brake actuator assembly).

Click here

NEXT

END

    READ NEXT:

     Steering Angle Sensor Supply Voltage Circuit Circuit Short to Ground or Open (C14FE14)

    DESCRIPTION This DTC is stored when the skid control ECU (brake actuator assembly) receives a +B line open signal from the steering angle sensor. DTC No. Detection Item DTC Detection Cond

     Brake Switch "A" Circuit Short to Ground (P057111)

    DESCRIPTION The skid control ECU (brake actuator assembly) receives stop light switch assembly signals and uses them to determine whether or not the brakes are applied. When the brake pedal is depre

     Brake Switch "A" Circuit Short to Battery (P057112)

    DESCRIPTION The skid control ECU (brake actuator assembly) receives stop light switch assembly signals and uses them to determine whether or not the brakes are applied. DTCs may be stored if either

    SEE MORE:

     Short to GND or Open in Buzzer (C1ABE)

    DESCRIPTION DTC C1ABE is stored when the blind spot monitor sensor LH detects a short to ground or open in the RCTA buzzer (blind spot monitor buzzer) circuit. DTC No. Detection Item DTC Detection Condition Trouble Area C1ABE Short to GND or Open in Buzzer Both o

     Rear seats (folding type)

    The seatbacks of the rear seats can be folded down. Folding down the rear seatbacks Pull the seatback lever in the trunk for the seatback you wish to fold down and then fold the seatback down. WARNING ■When folding the seatbacks down Observe the following precautions. Failure to do so

    © 2023-2024 Copyright www.tocamry.com