Toyota Camry (XV70): Cellular Phone Inspection
PROCEDURE
|
1. | CHECK USAGE CONDITION |
(a) Check that the vehicle and cellular phone meet the following conditions:
NOTICE:
If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.
- The cellular phone is "Bluetooth" compatible.
Click here
.gif)
- The cellular phone is registered as a hands-free device.
- "Bluetooth" setting of the cellular phone is on.
- Operating system and software of the cellular phone are the latest versions.
- There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.
- The "Wi-Fi" setting of the cellular phone is off.
- The "Wi-Fi" tethering setting of the cellular phone is off.
(b) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
| Result |
Proceed to |
|---|---|
| The cellular phone is connected correctly. |
A |
| The cellular phone is not connected correctly. |
B |
| A |
.gif) | END |
|
.gif)
| 2. |
RESTART CELLULAR PHONE |
(a) Restart the cellular phone.
(b) Turn the ignition switch off.
(c) Turn the ignition switch to ACC.
(d) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
| Result |
Proceed to |
|---|---|
| The cellular phone is connected correctly. |
A |
| The cellular phone is not connected correctly. |
B |
| A |
| END |
|
| 3. |
CHECK OPERATION |
(a) Check if the in-vehicle device can be recognized by the cellular phone.
| Result |
Proceed to |
|---|---|
| In-vehicle device can be recognized. |
A |
| In-vehicle device cannot be recognized. |
B |
| B |
| GO TO STEP 5 |
|
| 4. |
REGISTER AGAIN |
(a) Clear all "Bluetooth" devices registered to the cellular phone and the radio and display receiver assembly.
(b) Register the cellular phone again.
(c) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
| Result |
Proceed to |
|---|---|
| The cellular phone is connected correctly. |
A |
| The cellular phone is not connected correctly. |
B |
| A |
| END |
|
| 5. |
CHECK USING ANOTHER VEHICLE |
(a) Check if the customer's cellular phone functions normally using another "Bluetooth" compatible vehicle.
HINT:
- Make sure to obtain the customer's permission to perform this procedure.
- After the inspection, clear the registered information and usage history acquired during the inspection.
| Result |
Proceed to |
|---|---|
| The cellular phone is connected correctly. |
A |
| The cellular phone is not connected correctly. |
B |
| A |
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE
|
|
| 6. |
CHECK USING ANOTHER CELLULAR PHONE |
(a) Check if the system functions normally using another "Bluetooth" compatible cellular phone.
HINT:
- Make sure to obtain the customer's permission to perform this procedure.
- After the inspection, clear the registered information and usage history acquired during the inspection.
| Result |
Proceed to |
|---|---|
| The cellular phone is connected correctly. |
A |
| The cellular phone is not connected correctly. |
B |
| A |
| END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED) |
| B |
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE
|
READ NEXT:
Sound of Portable Player cannot be Heard from Speakers or Sound is Low
PROCEDURE
1. CHECK PORTABLE PLAYER SETTINGS
(a) Check the portable player settings. (1) Check that the volume is not set to "0".
(2) Check that mute is off. (b) Check that the sound of
Does not Play even after Bluetooth Audio Mode is Selected
CAUTION / NOTICE / HINT
NOTICE:
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to
Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device
PROCEDURE
1. CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL
(a) Check if track information is displayed normally on another "Bluetooth" audio compatible vehicle o
SEE MORE:
Pillar Speaker
ComponentsCOMPONENTS ILLUSTRATION
*1 FRONT DOOR OPENING TRIM WEATHERSTRIP
*2 FRONT NO. 3 SPEAKER ASSEMBLY
*3 FRONT PILLAR GARNISH
*4 CLIP
● Non-reusable part
- - RemovalREMOVAL CAUTION / NOTICE / HINT
HINT:
Use the same procedure
Multi-axis Acceleration Sensor Module "A" Signal Stuck In Range (C05202A)
DESCRIPTION The airbag sensor assembly has a built-in yaw rate and acceleration sensor and detects the vehicle condition.
The skid control ECU (brake actuator assembly) memorizes the range of the acceleration sensor (airbag sensor assembly) and the range of vehicle speed calculated using each spee
