Toyota Camry (XV70): Customize Parameters
CUSTOMIZE PARAMETERS
CUSTOMIZE BLIND SPOT MONITOR SYSTEM
(a) Customizing with the Techstream
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(1) Connect the Techstream to the DLC3.
(2) Turn the engine switch to ON.
(3) Turn the blind spot monitor system on.
(4) Turn the Techstream on.
(5) Enter the following menus: Body Electrical / Blind Spot Monitor Master or Blind Spot Monitor Slave / Utility / Warning.
(6) Select the setting by referring to the table below.
Warning|
Tester Display | Description |
Default | Setting |
ECU |
|---|---|---|---|---|
| BSM Buzzer Volume Adjust |
Sets the volume of the RCTA buzzer (blind spot monitor buzzer). |
Medium | 001:Low,011:Medium,101:High |
Blind Spot Monitor Sensor LH (Slave) |
|
BSM Mirror Indicator Brightness |
Sets the brightness of the indicators in the outer rear view mirror assemblies. |
Bright | 001:Dark,101:Bright |
Blind Spot Monitor Sensor RH (Master) |
|
RCTA Function | Switches the RCTA function on and off.* |
ON | 0:ON,1:OFF |
Blind Spot Monitor Sensor RH (Master) |
|
BSM Approaching Vehicle Detection Timing Setting |
Sets the notification timing for vehicles approaching from behind the vehicle. |
Middle | 00:Only Blind Spot,01:Late,10:Middle,11:Early |
Blind Spot Monitor Sensor RH (Master) |
- *: If the RCTA function is turned off, the RCTAB function of the parking support brake system also turns off.
(b) Customizing with multi-information display (for 7 Inch Display Model)
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(1) Turn the engine switch to ON.
(2) Turn the blind spot monitor system on.
(3) Enter the following menus: Setting icon / BSM or RCTA.
(4) Select the setting by referring to the table below.
BSM|
Display | Description |
Default | Setting |
ECU |
|---|---|---|---|---|
| Brightness |
Sets the brightness of the indicators in the outer rear view mirror assemblies. |
Bright | Dark or Bright |
Blind Spot Monitor Sensor RH (master) |
|
Sensitivity | Sets the notification timing for vehicles approaching from behind the vehicle. |
Middle | Early, Middle, Late or Only Blind Spot |
Blind Spot Monitor Sensor RH (master) |
|
Display | Description |
Default | Setting |
ECU |
|---|---|---|---|---|
| Volume |
Sets the volume of the RCTA buzzer (blind spot monitor buzzer). |
2 | 3, 2 or 1 |
Blind Spot Monitor Sensor RH (master) |
(c) Customizing with multi-information display (except 7 Inch Display Model)
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(1) Turn the engine switch to ON.
(2) Turn the blind spot monitor system on.
(3) Enter the following menus: Vehicle Setting
(4) Select the setting by referring to the table below.
|
Display | Description |
Default | Setting |
ECU |
|---|---|---|---|---|
| Brightness |
Sets the brightness of the indicators in the outer rear view mirror assemblies. |
Bright | Dark or Bright |
Blind Spot Monitor Sensor RH (master) |
|
Sensitivity | Sets the notification timing for vehicles approaching from behind the vehicle. |
Middle | Early, Middle, Late or Only Blind Spot |
Blind Spot Monitor Sensor RH (master) |
|
Volume | Sets the volume of the RCTA buzzer (blind spot monitor buzzer). |
2 | 3, 2 or 1 |
Blind Spot Monitor Sensor RH (master) |
READ NEXT:
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order
Terminals Of Ecu
TERMINALS OF ECU BLIND SPOT MONITOR SENSOR RH (MASTER)
Terminal No. (Symbol)
Wiring Color Terminal Description
Condition Specified Condition
W5-4 (OMIR) - W5-10 (BRGD)
Diagnosis System
DIAGNOSIS SYSTEM DESCRIPTION (a) Blind spot monitor data and Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctionin
SEE MORE:
Components
COMPONENTS ILLUSTRATION
*1 ENGINE ASSEMBLY WITH TRANSAXLE
*2 FRONT BUMPER EXTENSION SUB-ASSEMBLY RH
*3 FRONT BUMPER EXTENSION SUB-ASSEMBLY LH
*4 FRONT SUSPENSION MEMBER BRACKET SUB-ASSEMBLY RH
*5 FRONT SUSPENSION MEMBER BRACKET SUB-ASSEMBLY LH
*6
Removal
REMOVAL CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the battery removal/installation are shown below. Necessary Procedure After Parts Removed/Installed/Repl
