Toyota Camry (XV70): Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Blind Spot Monitor System|
DTC No. | Detection Item |
Link |
|---|---|---|
| C1A45 |
Vehicle Speed Sensor |
|
|
C1A45 | Vehicle Speed Sensor |
|
|
C1A46 | Yaw Rate Sensor |
|
|
C1A46 | Yaw Rate Sensor |
|
|
C1A47 | Steering Angle Sensor |
|
|
C1A47 | Steering Angle Sensor |
|
|
C1AB0 | Short to +B in Outer Mirror Indicator(Master) |
|
|
C1AB1 | Short to +B in Outer Mirror Indicator(Slave) |
|
|
C1AB2 | Short to GND in Outer Mirror Indicator(Master) |
|
|
C1AB3 | Short to GND in Outer Mirror Indicator(Slave) |
|
|
C1AB4 | Open in Outer Mirror Indicator(Master) |
|
|
C1AB5 | Open in Outer Mirror Indicator(Slave) |
|
|
C1AB6 | Blind Spot Monitor Master Module |
|
|
C1AB7 | Blind Spot Monitor Slave Module |
|
|
C1AB8 | Destination Information Undefined |
|
|
C1AB8 | Destination Information Undefined |
|
|
C1ABB | Blind Spot Monitor Master Module Beam Axis Inspection Incomplete |
|
|
C1ABC | Blind Spot Monitor Slave Module Beam Axis Inspection Incomplete |
|
|
C1ABE | Short to GND or Open in Buzzer |
|
|
C1AC1 | Master Module Horizontal Axis Misalignment |
|
|
C1AC2 | Slave Module Horizontal Axis Misalignment |
|
|
U0100 | Lost Communication with ECM / PCM "A" |
|
|
U0100 | Lost Communication with ECM / PCM "A" |
|
|
U0125 | Lost Communication with Yaw Rate Sensor Module |
|
|
U0125 | Lost Communication with Yaw Rate Sensor Module |
|
|
U0126 | Lost Communication with Steering Angle Sensor Module |
|
|
U0126 | Lost Communication with Steering Angle Sensor Module |
|
|
U0129 | Lost Communication with Brake System Control Module |
|
|
U0129 | Lost Communication with Brake System Control Module |
|
|
U0142 | Lost Communication with Body Control Module "B" |
|
|
U0142 | Lost Communication with Body Control Module "B" |
|
|
U0232 | Lost Communication with Blind Spot Monitor Slave Module |
|
|
U0233 | Lost Communication with Blind Spot Monitor Master Module |
|
|
U1331 | Software Incompatibility with Body Control Module "B" |
|
|
U1331 | Software Incompatibility with Body Control Module "B" |
|
.gif)
READ NEXT:
Vehicle Speed Sensor (C1A45)
DESCRIPTION The blind spot monitor sensor receives vehicle speed signals from the skid control ECU via CAN communication. Blind Spot Monitor Master
DTC No. Detection Item
DTC Detection Co
Yaw Rate Sensor (C1A46)
DESCRIPTION The blind spot monitor sensor receives yaw rate signals from the airbag sensor assembly (yaw rate and acceleration sensor) via CAN communication. Blind Spot Monitor Master
DTC No.
Steering Angle Sensor (C1A47)
DESCRIPTION The blind spot monitor sensor receives steering angle signals from the steering sensor via CAN communication. Blind Spot Monitor Master
DTC No. Detection Item
DTC Detection Co
SEE MORE:
Reassembly
REASSEMBLY PROCEDURE 1. INSTALL RING PIN
(a) Install the 2 ring pins to the front oil pump cover sub-assembly.
2. INSTALL FRONT OIL PUMP BODY
(a) Install the front oil pump body to the front oil pump cover sub-assembly.
3. INSTALL FRONT OIL PUMP
Differential System
PrecautionPRECAUTION
Before disassembling the differential assembly, thoroughly clean it by removing any sand, mud or foreign matter. This will help prevent contamination during disassembly and reassembly.
When removing the differential side bearing retainer or any other light alloy pa
