Toyota Camry (XV70): Essential information
READ NEXT:
The emergency flashers are used to warn other drivers when the
vehicle has to be stopped on the road due to a breakdown, etc.
Press the switch.
All the turn signal lights will flash.
To turn t
Only in an emergency, such as if it becomes impossible to stop
the vehicle in the normal way, stop the vehicle using the following
procedure:
1. Steadily step on the brake pedal with both feet and
This vehicle is not designed to be able to drive on roads that are
deeply flooded with water. Do not drive on roads where the
roads may be submerged or the water may be rising. It is dangerous
to r
SEE MORE:
INITIALIZATION
Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed
Link Perform steering sensor zero point calibration
Lane Tracing Assist System
Pre-collision System
Memorize steering angle neutral point
Parkin
INSTALLATION PROCEDURE 1. INSTALL REAR ENGINE MOUNTING INSULATOR
(a) Engage the clamp and install the vacuum hose to the rear engine mounting insulator.
(b) Install the wire harness clamp bracket to the rear engine mounting insulator with the bolt.
Torque: 10 N·m {102 kgf·cm, 7 ft·lbf}